3.1
Printing Flow
3
Let's Make Prints
This chapter describes a basic print workflow using this machine.
First confirm the basic flow to print data, then add detailed settings and adjustment to meet your require-
ments.
d
Reference
For information about application settings of this machine and adjustment procedures, refer to the [HTML Us-
er's Guide].
3.1
Printing Flow
First check that your original data is printed in the following flow.
The detailed operations or setting procedures are described in the reference page for each step.
3.1.1
Step 1: Prepare the printer driver and applications
Install the printer driver and applications in your computer.
After installation is completed, configure information of the mounted
devices using the printer driver to use optional functions.
For details, refer to the [HTML User's Guide].
3.1.2
Step 2: Load paper into a tray
Load paper into the Main Body Trays or an optional paper tray.
For details, refer to the following pages:
-
To load paper into the Main Body Trays: Refer to page 4-3.
-
To load paper into Paper Feeder Unit PF-602m: Refer to
page 4-5.
-
To load paper into another optional device: Refer to page 4-6.
3.1.3
Step 3: Configure information of the paper loaded into a tray in this machine
Specify the type, size, weight, and other values of paper.
For details, refer to page 4-7.
AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
3
3-3