Edge-Core ECS3510-10PD Management Manual page 341

MAC Address Mask – The filter rule will check for the range of MAC
◆
addresses defined by the MAC bit mask. If you omit the mask, the
system will assign the default mask of an exact match.
(Range: 000000000000 - FFFFFFFFFFFF; Default: FFFFFFFFFFFF)
W I
EB NTERFACE
To add a MAC address filter for MAC authentication:
Click Security, Network Access.
1.
Select Configure MAC Filter from the Step list.
2.
Select Add from the Action list.
3.
Enter a filter ID, MAC address, and optional mask.
4.
Click Apply.
5.
Figure 176: Configuring a MAC Address Filter for Network Access
To show the MAC address filter table for MAC authentication:
Click Security, Network Access.
1.
Select Configure MAC Filter from the Step list.
2.
Select Show from the Action list.
3.
Figure 177: Showing the MAC Address Filter Table for Network Access
– 341 –
C 13
HAPTER
Network Access (MAC Address Authentication)
| Security Measures