Displaying Lldp Local Device Information; Table 23: Chassis Id Subtype - Edge-Core ECS4510-12PD Web Management Manual

Chapter 13
| Basic Administration Protocols
Link Layer Discovery Protocol
Displaying LLDP Local
Device Information
3.
Select Show CA-Type from the Action list.
4.
Select an interface from the Port or Trunk list.
Figure 229: Showing the Civic Address for an LLDP Interface
Use the Administration > LLDP (Show Local Device Information) page to display
information about the switch, such as its MAC address, chassis ID, management IP
address, and port information.
Parameters
These parameters are displayed:
General Settings
◆
Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity
associated with the transmitting LLDP agent. There are several ways in which a
chassis may be identified and a chassis ID subtype is used to indicate the type
of component being referenced by the chassis ID field.

Table 23: Chassis ID Subtype

ID Basis
Chassis component
Interface alias
Port component
MAC address
Network address
Interface name
Locally assigned
◆
Chassis ID – An octet string indicating the specific identifier for the particular
chassis in this system.
Reference
EntPhysicalAlias when entPhysClass has a value of 'chassis(3)' (IETF
RFC 2737)
IfAlias (IETF RFC 2863)
EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 2737)
MAC address (IEEE Std 802-2001)
networkAddress
ifName (IETF RFC 2863)
locally assigned
– 360 –