Configuring Transceiver Thresholds - Edge-Core ECS3510-10PD Management Manual

The switch can display diagnostic information for SFP modules which
support the SFF-8472 Specification for Diagnostic Monitoring Interface
for Optical Transceivers. This information allows administrators to
remotely diagnose problems with optical devices. This feature, referred
to as Digital Diagnostic Monitoring (DDM) provides information on
transceiver parameters.
W I
EB NTERFACE
To display identifying information and functional parameters for optical
transceivers:
Click Interface, Port, Transceiver.
1.
Select a port from the scroll-down list.
2.
Figure 41: Displaying Transceiver Data
Use the Interface > Port > Transceiver page to configure thresholds for
C
ONFIGURING
alarm and warning messages for optical transceivers which support Digital
T
RANSCEIVER
Diagnostic Monitoring (DDM). This page also displays identifying
T
HRESHOLDS
information for supported transceiver types, and operational parameters
for transceivers which support DDM.
CLI R
EFERENCES
"transceiver-monitor" on page 996
◆
"transceiver-threshold-auto" on page 996
◆
◆ "transceiver-threshold current" on page 997
"transceiver-threshold rx-power" on page 998
◆
C
HAPTER
– 167 –
| Interface Configuration
5
Port Configuration