Automatic Traffic Control - Edge-Core ECS3510-10PD Management Manual

| Congestion Control
C 9
HAPTER

Automatic Traffic Control

A T
UTOMATIC RAFFIC
Click Apply.
5.
Figure 122: Configuring Storm Control
C
ONTROL
Use the Traffic > Congestion Control > Auto Traffic Control pages to
configure bounding thresholds for broadcast and multicast storms which
can automatically trigger rate limits or shut down a port.
CLI R
EFERENCES
"Automatic Traffic Control Commands" on page 889
◆
C U
OMMAND SAGE
ATC includes storm control for broadcast or multicast traffic. The control
response for either of these traffic types is the same, as shown in the
following diagrams.
Figure 123: Storm Control by Limiting the Traffic Rate
Storm Alarm Storm Alarm
Traffic Traffic
Fire TRAP Fire TRAP
[kpps] [kpps]
StromAlarm StromAlarm
Alarm Fire Alarm Fire
ClearTRAP ClearTRAP
Threshold Threshold
（1～255kpps ） （1～255kpps ）
AlarmClear AlarmClear
Threshold Threshold
（1～255kpps ） （1～255kpps ）
– 268 –
TrafficControl TrafficControl
Apply Trap Apply Trap
Storm Alarm Storm Alarm
Fire TRAP Fire TRAP
Apply Timer Apply Timer
expired expired
Auto Storm Control Auto Storm Control
(0～300sec) (0～300sec)
Traffic without storm control Traffic without storm control
Traffic with storm control Traffic with storm control
StromAlarm StromAlarm
ClearTRAP ClearTRAP
TrafficControl TrafficControl
Release Trap Release Trap
Release Timer Release Timer
expired expired
(0～300sec) (0～300sec)
Time Time