Edge-Core ECS3510-10PD Management Manual page 236

| Address Table Settings
C 7
HAPTER
Configuring MAC Address Mirroring
cannot be set to the same target ports as that used for port mirroring
(see "Configuring Local Port Mirroring" on page
When traffic matches the rules for both port mirroring, and for
◆
mirroring of VLAN traffic or packets based on a MAC address, the
matching packets will not be sent to target port specified for port
mirroring.
P
ARAMETERS
These parameters are displayed:
Source MAC – MAC address in the form of xx-xx-xx-xx-xx-xx or
◆
xxxxxxxxxxxx.
Target Port – The port that will mirror the traffic from the source port.
◆
(Range: 1-10)
W I
EB NTERFACE
To mirror packets based on a MAC address:
Click MAC Address, Mirror.
1.
Select Add from the Action list.
2.
Specify the source MAC address and destination port.
3.
Click Apply.
4.
Figure 100: Mirroring Packets Based on the Source MAC Address
– 236 –
156).