Edge-Core ECS3510-10PD Management Manual page 467

P
ARAMETERS
These parameters are displayed:
Community String – A community string that acts like a password
◆
and permits access to the SNMP protocol.
Range: 1-32 characters, case sensitive
Default strings: "public" (Read-Only), "private" (Read/Write)
Access Mode – Specifies the access rights for the community string:
◆
Read-Only – Authorized management stations are only able to
■
retrieve MIB objects.
Read/Write – Authorized management stations are able to both
■
retrieve and modify MIB objects.
W I
EB NTERFACE
To set a community access string:
Click Administration, SNMP.
1.
Select Configure User from the Step list.
2.
Select Add Community from the Action list.
3.
Add new community strings as required, and select the corresponding
4.
access rights from the Access Mode list.
Click Apply
5.
Figure 257: Setting Community Access Strings
To show the community access strings:
Click Administration, SNMP.
1.
Select Configure User from the Step list.
2.
Select Show Community from the Action list.
3.
– 467 –
| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol