Edge-Core ECS3510-10PD Management Manual page 642

| Multicast Filtering
C 17
HAPTER
Filtering and Throttling IGMP Groups
removes an existing group and replaces it with the new multicast
group.
P
ARAMETERS
These parameters are displayed:
Interface – Port or trunk identifier.
◆
An IGMP profile or throttling setting can be applied to a port or trunk.
When ports are configured as trunk members, the trunk uses the
settings applied to the first port member in the trunk.
Profile ID – Selects an existing profile to assign to an interface.
◆
Max Multicast Groups – Sets the maximum number of multicast
◆
groups an interface can join at the same time. (Range: 1-255;
Default: 255)
◆ Current Multicast Groups – Displays the current multicast groups the
interface has joined.
Throttling Action Mode – Sets the action to take when the maximum
◆
number of multicast groups for the interface has been exceeded.
(Default: Deny)
Deny - The new multicast group join report is dropped.
■
Replace - The new multicast group replaces an existing group.
■
Throttling Status – Indicates if the throttling action has been
◆
implemented on the interface. (Options: True or False)
W I
EB NTERFACE
To configure IGMP filtering or throttling for a port or trunk:
Click Multicast, IGMP Snooping, Filter.
1.
Select Configure Interface from the Step list.
2.
Select a profile to assign to an interface, then set the maximum
3.
number of allowed multicast groups and the throttling response.
Click Apply.
4.
– 642 –