Table 56: Show Logging Flash/Ram - Display Description - Edge-Core ECS3510-10PD Management Manual

| System Management Commands
C 20
HAPTER
Event Logging
show logging
level: 6, module: 5, function: 1, and event no.: 1
Console#
This command displays the configuration settings for logging messages to
local switch memory, to an SMTP event handler, or to a remote syslog
server.
S
YNTAX
show logging {flash | ram | sendmail | trap}
flash - Displays settings for storing event messages in flash
memory (i.e., permanent memory).
ram - Displays settings for storing event messages in temporary
RAM (i.e., memory flushed on power reset).
sendmail - Displays settings for the SMTP event handler
(page 758).
trap - Displays settings for the trap function.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following example shows that system logging is enabled, the message
level for flash memory is "errors" (i.e., default level 3 - 0), and the
message level for RAM is "debugging" (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level debugging
Console#

Table 56: show logging flash/ram - display description

Field Description
Syslog logging Shows if system logging has been enabled via the
command.
History logging in FLASH The message level(s) reported based on the
command.
History logging in RAM The message level(s) reported based on the
command.
– 754 –
Enabled
Enabled
logging on
logging history
logging history