Edge-Core ECS3510-10PD Management Manual page 6

A T G
BOUT HIS UIDE
R H
EVISION ISTORY
This section summarizes the changes in each revision of this guide.
M 2014 R
ARCH ELEASE
This is the third release of this guide. This guide is valid for software
release v1.4.2.1. It includes the following changes:
Added the command
◆
D 2013 R
ECEMBER ELEASE
This is the second release of this guide. This guide is valid for software
release v1.4.0.1. It includes the following changes:
Updated parameter values under
◆
page 141.
Updated parameter values under
◆
page 143.
Updated description of parameters under
◆
page 152.
Added timeout parameter under
◆
page 177.
Added sections "Displaying Transceiver Data" on page
◆
"Configuring Transceiver Thresholds" on page
Load Balancing" on page
Added the section "Creating CVLAN to SPVLAN Mapping Entries" on
◆
page 215.
Added "priority" parameter under
◆
Interfaces" on page
Added the section "Configuring MAC Address Learning" on page
◆
Added new parameters under
◆
page 242.
Updated description of "Type" parameter and added description of
◆
"CoS" parameter under
Updated description of "Access Level" parameter under
◆
User Accounts" on page
Added "Counter" parameter under
◆
List" on page 373.
Added the sections
◆
"Showing ACL Hardware Counters" on page
Added the parameter "Allow Zeros" under
◆
for ARP Inspection" on page
– 6 –
"clock timezone-predefined" on page
"Configuring the Console Port" on
"Configuring Telnet Settings" on
"Configuring by Port List" on
"Configuring a Dynamic Trunk" on
187.
"Mapping Protocol Groups to
221.
"Configuring Loopback Detection" on
"Configuring a Class Map" on page
328.
"Binding a Port to an Access Control
"Configuring ACL Mirroring" on page 374
"Configuring Global Settings
378.
771.
166,
167, and "Configuring
229.
290.
"Configuring
and
376.