Setting The Start-Up File - Edge-Core ECS3510-10PD Management Manual

N :
OTE
only by available flash memory space.
W I
EB NTERFACE
To save the running configuration file:
Click System, then File.
1.
Select Copy from the Action list.
2.
Select Running-Config from the Copy Type list.
3.
Select the current startup file on the switch to overwrite or specify a
4.
new file name.
Then click Apply.
5.
Figure 8: Saving the Running Configuration
If you replaced a file currently used for startup and want to start using the
new file, reboot the system via the System > Reset menu.
Use the System > File (Set Start-Up) page to specify the firmware or
S
ETTING THE
configuration file to use for system initialization.
S -U F
TART P ILE
CLI R
EFERENCES
"whichboot" on page 732
◆
"boot system" on page 727
◆
W I
EB NTERFACE
To set a file to use for system initialization:
Click System, then File.
1.
Select Set Start-Up from the Action list.
2.
Mark the operation code or configuration file to be used at startup
3.
Then click Apply.
4.
The maximum number of user-defined configuration files is limited
– 127 –
| Basic Management Tasks
C 4
HAPTER
Managing System Files