P
ARAMETERS
The following parameters are displayed:
Copy Type – The firmware copy operation includes these options:
◆
FTP Upload – Copies a file from an FTP server to the switch.
■
FTP Download – Copies a file from the switch to an FTP server.
■
HTTP Upload – Copies a file from a management station to the
■
switch.
HTTP Download – Copies a file from the switch to a management
■
station
TFTP Upload – Copies a file from a TFTP server to the switch.
■
TFTP Download – Copies a file from the switch to a TFTP server.
■
FTP/TFTP Server IP Address – The IP address of an FTP/TFTP server.
◆
User Name – The user name for FTP server access.
◆
Password – The password for FTP server access.
◆
◆
File Type – Specify Operation Code to copy firmware.
File Name – The file name should not contain slashes (\ or /), and the
◆
maximum length for file names is 32 characters for files on the switch
or 127 characters for files on the server. (Valid characters: A-Z, a-z,
0-9, ".", "-", "_")
Only one copy of the system software (i.e., the runtime firmware)
N
:
OTE
can be stored in the file directory on the switch.
The maximum number of user-defined configuration files is limited
N
:
OTE
only by available flash memory space.
The file
N
:
"Factory_Default_Config.cfg"
OTE
or management station, but cannot be used as the destination file name on
the switch.
W
I
EB
NTERFACE
To copy firmware files:
Click System, then File.
1.
Select Copy from the Action list.
2.
Select FTP Upload, HTTP Upload, or TFTP Upload as the file transfer
3.
method.
If FTP or TFTP Upload is used, enter the IP address of the file server.
4.
– 125 –
| Basic Management Tasks
C
4
HAPTER
Managing System Files
can be copied to a file server