Edge-Core ECS3510-10PD Management Manual page 465

Table 31: Supported Notification Messages (Continued)
Model
swCpuUtiFallingNotification
swMemoryUtiRisingThreshold
Notification
swMemoryUtiFallingThreshold
Notification
dhcpRougeServerAttackTrap
lbdDetectionTrap
lbdRecoveryTrap
sfpThresholdAlarmWarnTrap
udldPortShutdownTrap
swAuthenticationFailure
swAuthenticationSuccess
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
Level
1.3.6.1.4.1.259.10.1.25.2.1.0.108 This notification indicates that the CPU utilization
1.3.6.1.4.1.259.10.1.25.2.1.0.109 This notification indicates that the memory
1.3.6.1.4.1.259.10.1.25.2.1.0.110 This notification indicates that the memory
1.3.6.1.4.1.259.10.1.25.2.1.0.114 This trap is sent when receiving a DHCP packet
1.3.6.1.4.1.259.10.1.25.2.1.0.141 This trap is sent when a loopback condition is
1.3.6.1.4.1.259.10.1.25.2.1.0.142 This trap is sent when a recovery is done by LBD.
1.3.6.1.4.1.259.10.1.25.2.1.0.189 This trap is sent when the SFP's A/D quantity is
1.3.6.1.4.1.259.10.1.25.2.1.0.192 This trap is sent when the port is shut down by
1.3.6.1.4.1.259.10.1.25.2.1.0.199 This trap will be triggered if authentication fails.
1.3.6.1.4.1.259.10.1.25.2.1.0.200 This trap will be triggered if authentication is
W I
EB NTERFACE
To configure an SNMP group:
Click Administration, SNMP.
1.
Select Configure Group from the Step list.
2.
Select Add from the Action list.
3.
Enter a group name, assign a security model and level, and then select
4.
read, write, and notify views.
Click Apply
5.
– 465 –
| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol
Group
has fallen from cpuUtiRisingThreshold to
cpuUtiFallingThreshold.
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
utilization has fallen from
memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
from a rouge server.
detected by LBD.
not within alarm/warning thresholds.
UDLD.
successful.