Figure 244: Showing The Civic Address For An Lldp Interface; Table 24: Chassis Id Subtype - Edge-Core ECS4620-28T Quick Start Manual

To show the physical location of the attached device:
1.
2.
3.
4.

Figure 244: Showing the Civic Address for an LLDP Interface

Displaying LLDP
Use the Administration > LLDP (Show Local Device Information) page to display
Local Device information about the switch, such as its MAC address, chassis ID, management IP
address, and port information.
Information
Parameters
These parameters are displayed:
General Settings
◆
Click Administration, LLDP.
Select Configure Interface from the Step list.
Select Show CA-Type from the Action list.
Select an interface from the Port or Trunk list.
Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity
associated with the transmitting LLDP agent. There are several ways in which a
chassis may be identified and a chassis ID subtype is used to indicate the type
of component being referenced by the chassis ID field.

Table 24: Chassis ID Subtype

ID Basis Reference
Chassis component EntPhysicalAlias when entPhysClass has a value of 'chassis(3)' (IETF
RFC 2737)
Interface alias IfAlias (IETF RFC 2863)
Port component EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Locally assigned locally assigned
– 403 –
Chapter 13
| Basic Administration Protocols
Link Layer Discovery Protocol