Edge-Core ECS3510-10PD Management Manual page 987

This command forces the port type selected for combination ports 9-10.
media-type
Use the no form to restore the default mode.
S
YNTAX
media-type mode
no media-type
mode
D
EFAULT
RJ-45: copper-forced
Combination: sfp-preferred-auto
C
OMMAND
Interface Configuration (Ethernet – Ports 9-10)
C
OMMAND
Ports 1-8 are fixed at copper-forced mode.
E
XAMPLE
This forces the switch to use the built-in RJ-45 port for the combination
port 10.
Console(config)#interface ethernet 1/10
Console(config-if)#media-type copper-forced
Console(config-if)#
This command enables auto-negotiation for a given interface. Use the no
negotiation
form to disable auto-negotiation.
S
YNTAX
[no] negotiation
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
copper-forced - Always uses the built-in RJ-45 port.
sfp-forced - Always uses the SFP port (even if module not
installed).
sfp-preferred-auto - Uses SFP port if both combination types
are functioning and the SFP port has a valid link.
S
ETTING
M
ODE
U
SAGE
S
ETTING
M
ODE
– 987 –
| Interface Commands
C 26
HAPTER
Interface Configuration