Edge-Core ECS3510-10PD Management Manual page 222

| VLAN Configuration
C 6
HAPTER
Protocol VLANs
VLAN ID – VLAN to which matching protocol traffic is forwarded.
◆
(Range: 1-4094)
Priority – The priority assigned to untagged ingress traffic.
◆
(Range: 0-3, where 3 is the highest priority)
W I
EB NTERFACE
To map a protocol group to a VLAN for a port or trunk:
Click VLAN, Protocol.
1.
Select Configure Interface from the Step list.
2.
Select Add from the Action list.
3.
Select a port or trunk.
4.
Enter the identifier for a protocol group.
5.
Enter the corresponding VLAN to which the protocol traffic will be
6.
forwarded.
Set the priority to assign to untagged ingress frames.
7.
Click Apply.
8.
Figure 86: Assigning Interfaces to Protocol VLANs
To show the protocol groups mapped to a port or trunk:
Click VLAN, Protocol.
1.
Select Configure Interface from the Step list.
2.
Select Show from the Action list.
3.
Select a port or trunk.
4.
– 222 –