Edge-Core ECS3510-10PD Management Manual page 201

Remote VLAN – Reserves this VLAN for RSPAN (see
◆
Remote Port Mirroring" on page
Modify
VLAN ID – ID of configured VLAN (1-4094).
◆
VLAN Name – Name of the VLAN (1 to 32 characters).
◆
◆ Status – Enables or disables the specified VLAN.
Show
VLAN ID – ID of configured VLAN.
◆
◆ VLAN Name – Name of the VLAN.
Status – Operational status of configured VLAN.
◆
Remote VLAN – Shows if RSPAN is enabled on this VLAN (see
◆
"Configuring Remote Port Mirroring" on page
W I
EB NTERFACE
To create VLAN groups:
Click VLAN, Static.
1.
Select Add from the Action list.
2.
Enter a VLAN ID or range of IDs.
3.
Mark Enabled to configure the VLAN as operational.
4.
Specify whether the VLANs are to be used for remote port mirroring.
5.
Click Apply.
6.
Figure 69: Creating Static VLANs
– 201 –
| VLAN Configuration
C 6
HAPTER
IEEE 802.1Q VLANs
"Configuring
158).
158).