Network-Access Aging - Edge-Core ECS3510-10PD Management Manual

| General Security Measures
C 24
HAPTER
Network Access (MAC Address Authentication)
network-access
aging
Table 89: Network Access Commands (Continued)
Command
network-access link-detection
link-up
network-access link-detection
link-up-down
network-access
max-mac-count
network-access mode
mac-authentication
network-access
port-mac-filter
mac-authentication
intrusion-action
mac-authentication
max-mac-count
clear network-access
show network-access
show network-access
mac-address-table
show network-access
mac-filter
Use this command to enable aging for authenticated MAC addresses stored
in the secure MAC address table. Use the no form of this command to
disable address aging.
S
YNTAX
[no] network-access aging
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Authenticated MAC addresses are stored as dynamic entries in the
◆
switch's secure MAC address table and are removed when the aging
time expires. The address aging time is determined by the
address-table aging-time
This parameter applies to authenticated MAC addresses configured by
◆
the MAC Address Authentication process described in this section, as
well as to any secure MAC addresses authenticated by 802.1X,
– 886 –
Function
Configures the link detection feature to detect and
act upon link-up events
Configures the link detection feature to detect and
act upon both link-up and link-down events
Sets the maximum number of MAC addresses that
can be authenticated on a port via all forms of
authentication
Enables MAC authentication on an interface
Enables the specified MAC address filter
Determines the port response when a connected
host fails MAC authentication.
Sets the maximum number of MAC addresses that
can be authenticated on a port via MAC
authentication
Clears authenticated MAC addresses from the
address table
Displays the MAC authentication settings for port
interfaces
Displays information for entries in the secure MAC
address table
Displays information for entries in the MAC filter
tables
command.
Mode
IC
IC
IC
IC
IC
IC
IC
PE
PE
PE
PE
mac-