Edge-Core ECS3510-10PD Management Manual page 363

P
ARAMETERS
These parameters are displayed:
Type – Selects the type of ACLs to show in the Name list.
◆
Name – Shows the names of ACLs matching the selected type.
◆
Action – An ACL can contain any combination of permit or deny rules.
◆
◆ Source/Destination Address Type – Specifies the source or
destination IP address type. Use "Any" to include all possible addresses,
"Host" to specify a specific host address in the Address field, or "IP" to
specify a range of addresses with the Address and Subnet Mask fields.
(Options: Any, Host, IP; Default: Any)
Source/Destination IP Address – Source or destination IP address.
◆
◆ Source/Destination Subnet Mask – Subnet mask for source or
destination address. (See the description for Subnet Mask on
page 361.)
Source/Destination Port – Source/destination port number for the
◆
specified protocol type. (Range: 0-65535)
Source/Destination Port Bit Mask – Decimal number representing
◆
the port bits to match. (Range: 0-65535)
Protocol – Specifies the protocol type to match as TCP, UDP or Others,
◆
where others indicates a specific protocol number (0-255).
(Options: TCP, UDP, Others; Default: Others)
Service Type – Packet priority settings based on the following criteria:
◆
Precedence – IP precedence level. (Range: 0-7)
■
DSCP – DSCP priority level. (Range: 0-63)
■
Control Code – Decimal number (representing a bit string) that
◆
specifies flag bits in byte 14 of the TCP header. (Range: 0-63)
Control Code Bit Mask – Decimal number representing the code bits
◆
to match. (Range: 0-63)
The control bit mask is a decimal number (for an equivalent binary bit
mask) that is applied to the control code. Enter a decimal number,
where the equivalent binary bit "1" means to match a bit and "0"
means to ignore a bit. The following bits may be specified:
1 (fin) – Finish
■
2 (syn) – Synchronize
■
4 (rst) – Reset
■
8 (psh) – Push
■
16 (ack) – Acknowledgement
■
32 (urg) – Urgent pointer
■
– 363 –
| Security Measures
C 13
HAPTER
Access Control Lists