Edge-Core ECS3510-10PD Management Manual page 106

| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Table 6: Switch Main Menu (Continued)
Menu
Show
Add Member
Show Member
Show Information
Configure Interface
Configure
Show Information
Traffic
Rate Limit
Storm Control
Auto Traffic Control
Configure Global
Configure Interface
Priority
Default Priority
Queue
Trust Mode
DSCP to DSCP
Add
Show
CoS to DSCP
Add
Show
PHB to Queue
Add
Show
DiffServ
Configure Class
Add
Show
Modify
Add Rule
Show Rule
Description
Configures global settings for an MST instance
Adds VLAN members for an MST instance
Adds or deletes VLAN members for an MST instance
Displays MSTP values used for the bridge
Configures interface settings for an MST instance
Displays interface settings for an MST instance
Sets the input and output rate limits for a port
Sets the broadcast storm threshold for each interface
Sets thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port
Sets the time to apply the control response after traffic has
exceeded the upper threshold, and the time to release the control
response after traffic has fallen beneath the lower threshold
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a
response of rate limiting, or to send related SNMP trap messages
Sets the default priority for each port or trunk
Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
Selects DSCP or CoS priority processing
Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
Shows the DSCP to DSCP mapping list
Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
Shows the CoS to DSCP mapping list
Maps internal per-hop behavior values to hardware queues
Shows the PHB to Queue mapping list
Creates a class map for a type of traffic
Shows configured class maps
Modifies the name of a class map
Configures the criteria used to classify ingress traffic
Shows the traffic classification rules for a class map
– 106 –
Page
257
257
257
261
261
261
245
247
268
270
271
275
276
282
283
283
283
285
285
285
279
279
279
289
290
290
290
290
290
290