Maintenance Instructions; Helpful Hints; Tool List; Maintenance Records - Stairmaster Stratus Systems Owner's Manual

MAINTENANCE INSTRUCTIONS

HELPFUL HINTS

If you keep your StairMaster
and in good condition, it will operate more efficiently and last longer. It is
strongly recommended that you adhere to the maintenance service guidelines
presented in this Owner's Manual. Read all maintenance instructions thoroughly
before beginning work. In some instances, the use of an assistant is recom-
mended to perform the necessary task efficiently.
All references to the right or the left side and to the front or the back of
the Stratus systems cycle ergometer are made as if you were sitting on the
machine ready to exercise. For example, the drive chain is on the right side of the
bike. Major component names and locations are shown in Figures 14 through 17.

TOOL LIST

The following tools are needed to perform service and maintenance on the
Stratus systems cycle ergometer:
• shop goggles or other eye protection
• snap ring pliers, internal snap rings
• snap ring pliers, external snap rings
• combination wrenches (sizes 7/16" to 3/4")
• adjustable wrench
• 2-mm cone wrench
• allen wrenches (T-handled and L-bend)
• socket set or nut driver set (sizes 1/4" to 3/4")
• freewheel removal tool

Maintenance Records

The console on the Stratus systems cycle ergometer will keep track of the
following usage data on the machine:
• the number of hours the machine has been turned on
• the number of hours the machine has been in use
• the total number of miles cycled
• the number of exercise programs completed
Page 28
®
Stratus systems cycle ergometer properly serviced
• standard screwdriver
• locking pliers
• phillips screwdriver
• adjustable pliers
• alligator clips
• 15-mm cone wrench
• volt-ohm meter