Important Safety Instructions - Stairmaster Core Health & Fitness 10G Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

Before using this product, it is essential to read the ENTIRE Owner's Manual and ALL installation
instructions. The Owner's Manual describes equipment setup and instructs members on how to use
correctly and safely.
Read all warnings posted on the machine.
Health related injuries may result from incorrect or excessive use of exercise equipment. STAIRMASTER
strongly recommends you to encourage your members to discuss their health program or fitness
regimen with a health care professional, especially if you or they have not exercised for several years,
are over 35, or have known health conditions.
DANGER - to reduce the risk of electrical
shock:
1. Always unplug the machine from the electrical outlet
before cleaning or servicing.
2. This product is factory-equipped with a specific
DC Power Supply to permit connection to the
proper electric circuit. Make sure that the product is
connected to a dedicated power line having an outlet
with the same configuration as that of the plug.
3. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product.
NO adapter should be used with this product. If the
product must be reconnected for use on a different
type of electric circuit, the reconnection should be
made by qualified service personnel in order to avoid
a hazard.
4. This machine is not intended to be serviced by the end
user, refer servicing to qualified personnel only.
5. If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid hazard.
6. Keep the cord away from heated surfaces. Unplug
power cord when the machine is unattended and
before performing any preventative maintenance such
as cleaning or replacing a worn part.
WARNING!
WARNING - to reduce the risk of injury to
person:
24 in (0.6 m) 24 in (0.6 m)
F
ig
1. Assemble and operate the machine on a solid
level surface. Position the machine with a
minimum of 24 inches (0.6 meters) of clearance to
allow for ease of mounting and dismounting.
The actual area for access and passage shall be
the responsibility of the facility and should take
into account this training envelope, Americans
with Disabilities Act Accessibility Guidelines
(ADAAG) requirements and any required local
codes or regulations (www.access-board.gov/
ada).
2. Users under 80 lbs (36 kg) will result in equipment
not functioning as intended.
. 1 - Required Clearance
Page 3