2000-Sheet Dual Input (Ttm)-Tray 4 Lift Gear Assembly Removal - Lexmark X862de Service Manual

2000-sheet dual input (TTM)—tray 4 lift gear assembly removal
1.
Remove the rear cover. See
2.
Remove the controller card assembly. See
assembly removal" on page
3.
Release the two harnesses from the clamp of the tray 4 lift gear assembly (A).
4.
Remove two screws securing the tray 4 lift gear assembly (A).
5.
Remove the tray 4 lift gear assembly (A).
Clamps
"2000-sheet dual input (TTM)—rear cover removal" on page
4-281.
A
"2000-sheet dual input (TTM)—2TM/TTM controller card
7500-432, -632, and -832
4-219.
4-279
Repair information
Previous
Next
Go Back