7500-432, -632, and -832
1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Release two hooks securing the exit 2 left cover (A) to the exit 2 unit assembly.
4.
Move the exit 2 left cover (A) downward and outward in the direction of the arrow.
5.
Remove the exit 2 left cover (A).
Note: Extra force is required on the rear of the exit 2 left cover to break the seal of the double stick tape.
4-326
MFP Service Manual
"Exit 2 unit assembly removal" on page
Hook
Double stick tape
between covers
4-322.
A
Hook
Previous
Next
Go Back