Operator Panel Assembly Removal - Lexmark X862de Service Manual

Operator panel assembly removal

1.
Remove the rear RIP card cover. See
2.
Disconnect the four connectors from the RIP card assembly (A).
3.
Pull the stud (B) securing the filter (C) away from the rear motor cover (D).
4.
Remove the filter (C).
5.
Remove the rear motor cover. See
6.
Remove the controller box side cover. See
7.
Remove the rear upper cover. See
"Rear RIP card cover removal" on page
connectors
A
Rear
"Rear motor cover removal" on page
"Controller box side cover removal" on page
"Rear upper cover removal" on page
C
D
4-11.
4-15.
Repair information
7500-432, -632, and -832
4-13.
B
4-18.
4-135
Previous
Next
Go Back