Sensor (Registration) Static On Jam - Lexmark X862de Service Manual

200.01 Sensor (registration) static on jam

Step
1 Check the media position.
Open the printer left door assembly, and visually check it.
Does the media touch the sensor (registration)?
2 Check the sensor (registration) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Media Path.
4. Touch Registration.
Open the printer left door assembly, and check it.
Does the display on the operator panel change every time
the sensor actuator is operated?
3 Check the sensor (registration) connection.
Is the sensor (registration) properly connected?
4 Perform a print test.
Does the error continue?
Check
7500-432, -632, and -832
Yes
Remove the Go to step 2.
media.
Go to step 4. Go to step 3.
Replace the Replace the
sensor connection.
(registration).
Go to "Sensor
(registration)
removal" on
page 4-81.
Replace the Problem solved.
printer engine card
assembly.
Go to "Printer
engine card
assembly
removal" on
page 4-119.
Diagnostic information
Previous
No
Next
Go Back
2-37