7500-432, -632, and -832
2000-sheet dual input (TTM)—tray 3 lift gear assembly removal
1.
Remove the rear cover. See
2.
Remove the media feed unit 3 assembly. See
assembly removal (tray 3)" on page
3.
Release the harness from the clamp of the tray 3 lift gear assembly (A).
4.
Remove two screws securing the tray 3 lift gear assembly (A).
5.
Remove the tray 3 lift gear assembly (A).
Clamp
4-278
MFP Service Manual
"2000-sheet dual input (TTM)—rear cover removal" on page
"2000-sheet dual input (TTM)—media feed unit
4-250.
Clamp
A
Previous
4-219.
Next
Go Back