500-Sheet Drawer (2Tm)-Tray Lift One-Way Gear Clutch Assembly Removal - Lexmark X850e Service Manual

2X 500-sheet drawer (2TM)—tray lift one-way gear clutch assembly removal
1.
Remove the media feed unit assembly. See
removal (tray 3)" on page 4-9
(tray 4)" on page
2.
Remove the harness from the bracket (A).
3.
Remove the three screws securing the bracket (A) to the media feed unit assembly.
4.
Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5.
Remove the tray lift one-way clutch (B).
Clamp
"2X 500-sheet drawer (2TM)–media feed unit assembly removal
or
4-11.
Harness
A
Rear
"2X 500-sheet drawer (2TM)–media feed unit assembly
Washer
7500-XXX
B
4-19
Repair information