Lexmark X862de Service Manual page 675

8.
Disconnect the connector of the harness from duplex drive motor assembly (D) to the duplex main cable
assembly.
9.
Release the harness from the clamps of the duplex unit assembly.
10.
Remove the three screws securing the bracket (E) to the duplex unit assembly.
11.
Remove the bracket (E).
12.
Remove the two duplex drive gears 33/74T (F).
Rear
Clamps
F
E
7500-432, -632, and -832
Connector
D
Rear
F
Repair information
Previous
Next
Go Back
4-295