Sensor (Duplex Wait) On Jam - Lexmark X862de Service Manual

7500-432, -632, and -832
Step
10 Check the sensor (duplex wait) for proper connection.
Is the above sensor connected properly?
11 Perform a print test.
Does the error still occur?
12 Perform a print test.
Does the error still occur?
13 Perform a print test.
Does the error still occur?

230.00 Sensor (duplex wait) on jam

Step
1 Check the paper position.
Open the exit 2 left door assembly, and visually check it.
Does the paper remain in the exit 2?
2 Check the roll.
Open exit 2 left door assembly.
Is the exit 2 media transport roll assembly free of
excess wear and contamination?
3 Check the drive power transmission.
Do the exit 2 media transport roll assembly and the
other gears rotate smoothly?
4 Check the roll.
Open exit 2 left door assembly.
Is the exit 2 media exit roll assembly free of excess
wear and contamination?
2-48
MFP Service Manual
Check
Check
Yes
Replace the sensor Replace the
(duplex wait). connection.
Go to "Duplex
sensor (duplex
wait) removal" on
page 4-314.
Replace the exit Problem solved.
interface card
assembly.
Go to "Exit
interface card
assembly removal"
on page 4-117.
Go to step 11.
Replace the duplex Problem solved.
controller card
assembly.
Go to "Duplex
controller card
assembly removal"
on page 4-311.
Go to step 13.
Replace the printer Problem solved.
engine card
assembly.
Go to "Printer
engine card
assembly removal"
on page 4-119.
Yes
Remove the paper. Go to step 2.
Go to step 3. Clean or replace the
exit 2 unit assembly.
Go to
assembly removal"
on page
Go to step 4. Replace damaged
components or the
exit 2 unit assembly.
Go to
assembly removal"
on page
Go to step 5. Clean or replace the
exit 2 unit assembly.
Go to
assembly removal"
on page
Previous
No
Next
Go Back
No
"Exit 2 unit
4-322.
"Exit 2 unit
4-322.
"Exit 2 unit
4-322.