Sensor (Exit 1 Media Shift) Removal - Lexmark X862de Service Manual

Sensor (exit 1 media shift) removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover.
3.
Remove the rear upper cover. See
4.
Open the printer left door assembly.
5.
Remove the exit 2 unit assembly. See
6.
Open the printer front door assembly.
7.
Remove the printer front left cover. See
8.
Remove the exit 1 media shift assembly. See
9.
Remove the media shift motor. See
10.
Remove the two screws securing the bracket (A) to the exit 1 media shift assembly (B).
11.
Remove the bracket (A).
12.
Release the hooks securing the sensor (exit 1 media shift) (C) to the bracket (A).
13.
Remove the sensor (exit 1media shift) (C).
"Rear RIP card cover removal" on page
"Rear upper cover removal" on page
"Exit 2 unit assembly removal" on page
"Printer front left cover removal" on page
"Media shift motor removal" on page
C
Hooks
Hook
A
"Exit 1 media shift assembly removal" on page
B
7500-432, -632, and -832
4-13.
4-15.
4-322.
4-3.
4-105.
4-108.
Left
4-109
Repair information
Previous
Next
Go Back