Lexmark X862de Service Manual page 201

Step
9 Check the feed drive motor for connection.
Is the above sensor connected properly?
10 Check the inverter solenoid assembly for operation.
Perform the inverter solenoid test.
Open the ADF left cover assembly.
Remove the ADF front cover assembly. Go to
cover assembly removal" on page
Close the ADF left cover assembly.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch Inverter solenoid.
Does the inverter solenoid assembly operate properly?
11 Check the inverter solenoid assembly for connection.
Is the above motor connected properly?
12 Check the registration motor (forward or reverse) test.
Perform the registration motor test.
Open the ADF left cover assembly.
Remove the ADF rear cover. Go to
removal" on page
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch ADF registration drv mtr.
5. Touch Forward or reverse.
Does the ADF registration motor operate properly?
13 Check the ADF registration motor for connection.
Is the above motor connected properly?
Check
"ADF front
4-174.
"ADF rear cover
4-173.
7500-432, -632, and -832
Yes No
Replace the Replace the
ADF feed drive connection.
motor
assembly.
Go to "ADF
feed drive
motor
assembly
removal" on
page 4-180.
Go to step 12. Go to step 11.
Replace the Replace the
inverter connection.
solenoid
assembly.
Go to "Inverter
solenoid
assembly
removal" on
page 4-181.
Go to step 14. Go to step 13.
Replace the Replace the
ADF connection.
registration
motor.
Go to "ADF
registration
motor
removal" on
page 4-209.
Diagnostic information
Previous
Next
Go Back
2-101