Lexmark X862de Service Manual page 116

7500-432, -632, and -832
Error code or
message
283.01
Paper jam
Check area
G2
283.02
Paper jam
Check areas
G2, G3
283.03
Paper jam
Check areas
G2
283.04
Paper jam
Check areas
G4
284.00
Paper jam
Check area F
284.01
Paper jam
Check area F
284.02
Paper jam
Check areas
G2, G3
284.03
Paper jam
Check area
G2
284.04
Paper jam
Check area H
2-16
MFP Service Manual
Error contents
Sensor (buffer path) on jam B
Sensor (buffer path) static
jam A
Sensor (buffer path) static
jam B
Sensor (buffer path) static
jam C
Sensor (lower media exit) off
jam A
Sensor (lower media exit) on
jam A
Sensor (lower media exit) on
jam B
Sensor (lower media exit) on
jam C
Sensor (lower media exit) off
jam B
Description/Action
Sensor (buffer path) is not turned on within the
specified time after the sensor (finisher media
entrance is turned on.
At this time, the sensor (diverter gate) is turned on.
Refer to the Options Service Manual.
Paper remains on the sensor (finisher buffer path).
At this time, both sensor (diverter gate) and sensor
(finisher media exit) are on state.
Refer to the Options Service Manual.
Paper remains on the sensor (finisher buffer path).
At this time, the sensor (diverter gate) is on state but
the sensor (finisher media entrance) is turned off.
Refer to the Options Service Manual.
Paper remains on the sensor (finisher buffer path).
At this time, the sensor (diverter gate) is turned off.
Refer to the Options Service Manual.
Sensor (lower media exit) is not turned off within the
specified time after the finisher sensor (lower media
exit) is turned on.
At this time, the sensor (bridge unit media exit) is
turned off.
Refer to the Options Service Manual.
Sensor (buffer path) is not turned on within the
specified time after the sensor (finisher media
entrance) is turned on.
At this time the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
Sensor (buffer path) is not turned on within the
specified time after the sensor (bridge unit media
entrance) is turned on.
At this time, the sensor (finisher media entrance) is
turned on.
Refer to the Options Service Manual.
Finisher sensor (lower media exit) not turned on
within the specified time after the sensor (buffer
path) is turned on.
Refer to the Options Service Manual.
Finisher sensor (lower media exit) not turned off
within the specified time after the finisher sensor
(lower media exit) on.
At this time, the sensor (finisher media entrance) is
turned on.
Refer to the Options Service Manual.
Previous
Next
Go Back