Adf Feed Drive Motor Assembly Removal - Lexmark X862de Service Manual

7500-432, -632, and -832

ADF feed drive motor assembly removal

1.
Open the ADF left cover assembly.
2.
Lift the document tray assembly.
3.
Remove the ADF rear cover. See
4.
Remove the ADF registration motor. See
5.
Disconnect the three connectors from the ADF dual drive motor assembly (A).
6.
Remove the screw securing the harness guide (B) to the ADF.
7.
Remove the two screws securing the ADF dual drive motor assembly (A) to the base of the ADF.
8.
Remove the two screws securing the ADF dual drive motor assembly (A) to the rear of the ADF.
9.
Remove the stud screw securing the ADF dual drive motor assembly (A) to the rear of the ADF.
10.
Remove the plastic support (C).
11.
Remove the connectors P751, P754, P755, P758, P761, P785 and P786 from the ADF controller card
assembly (D).
12.
Remove the harness guide (B) containing the harnesses and swing it out of the way.
13.
Remove the ADF dual drive motor assembly (A) from the ADF.
P757
P758
P759
P760
P785
P761
D
C
A
Connectors
4-180
MFP Service Manual
"ADF rear cover removal" on page
P786
P756
P755
P754
P753
P752
P751
B
Stud screw
"ADF registration motor removal" on page
A
4-173.
4-209.
Previous
Next
Go Back