Exit 2 Sensor (Standard Bin Full Exit 2) Removal - Lexmark X862de Service Manual

Exit 2 sensor (standard bin full exit 2) removal

1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove the exit 2 left cover. See
4.
Remove the exit 2 right cover. See
5.
Disconnect the sensor (standard bin full exit 2) (A).
6.
Release the hooks to the sensor (standard bin full exit 2) (A) from the exit 2 unit assembly.
7.
Remove the sensor (standard bin full exit 2) (A).
Front
"Exit 2 unit assembly removal" on page
"Exit 2 left cover removal" on page
"Exit 2 right cover removal" on page
Connector
A
Hook
7500-432, -632, and -832
4-322.
4-325.
4-327.
4-337
Repair information
Previous
Next
Go Back