Sensor (platen length APS 2) removal
1.
Remove the large platen glass. See
2.
Remove the eight screws securing the cover (A) to the scanner unit assembly.
3.
Remove the cover (A).
4.
Disconnect the sensor (platen length APS 2) (B).
5.
Remove the screw securing the sensor (platen length APS 2) (B).
6.
Remove the sensor (platen length APS 2) (B).
Note: Ensure that the white connector is plugged into the sensor (platen length APS 2) (B).
"Large platen glass removal" on page
7500-432, -632, and -832
4-150.
4-157
Repair information
Previous
Next
Go Back