Size Mismatch Jam (Mix-Size) - Lexmark X862de Service Manual

Step
11 Check the inverter solenoid assembly for connection.
Is the above motor connected properly?
12 Check the registration motor (forward or reverse) test.
Perform the registration motor test.
Open the ADF left cover assembly.
Remove the ADF rear cover. Go to
removal" on page
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch ADF registration drv mtr.
5. Touch Forward or reverse.
Does the ADF registration motor operate properly?
13 Check the ADF registration motor for connection.
Is the above motor connected properly?
14 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
15 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?

295.00 Size mismatch jam (mix-size)

Step
1 Check the document tray media guide position.
Are the document tray media guides set correctly?
Check
"ADF rear cover
4-173.
Check
7500-432, -632, and -832
Yes No
Replace the Replace the
inverter solenoid connection.
assembly.
Go to "Inverter
solenoid
assembly
removal" on
page 4-181.
Go to step 14. Go to step 13.
Replace the ADF Replace the
registration connection.
motor.
Go to "ADF
registration
motor removal"
on page 4-209.
Replace the ADF Go to step 15.
controller card
assembly.
Go to "ADF
controller card
assembly
removal" on
page 4-175.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-130.
Yes No
Go to step 2. Adjust the
document tray
media guides to
the proper
position.
Diagnostic information
Previous
Next
Go Back
2-117