No Media In The Select Media Tray - Lexmark X862de Service Manual

Step
6 Perform a print test.
Does the error still occur?
7 Perform a print test.
Does the error still occur?

No media in the select media tray

Step
1 Check the media.
Is the media loaded in the selected tray?
2 Check the sensor (media out) for operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor test.
4. Touch Tray 1.
5. Touch Media out.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor test.
4. Touch Tray 2.
5. Touch Media out.
Remove the media tray assembly.
Does the display on the operator panel change every time
the sensing area is blocked by the media out actuator?
3 Check the sensor (media out) connection for tray 1 or
tray 2.
Is the sensor (media out) properly connected for tray 1 or
tray 2?
Check
Check
7500-432, -632, and -832
Yes
Replace the 2TM/ Problem solved.
TTM controller card
assembly.
Go to "2000-sheet
dual input (TTM)—
2TM/TTM controller
card assembly
removal" on
page 4-281.
Go to step 7.
Replace the printer Problem solved.
engine card
assembly.
Go to "Printer
engine card
assembly removal"
on page 4-119.
Yes
Go to step 2. Load media
properly.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (media connection.
out).
Go to "Sensor
(media out)
removal" on
page 4-40.
Diagnostic information
Previous
No
Next
Go Back
No
2-179