High capacity input tray (HCIT) drawer slide assembly removal
The left and right drawer slide assemblies are the same, and only one is in a package. The instructions below
are for removing the left slide; removing the right slide has similar instructions.
1. Remove the HCIT media tray assembly. See
removal" on page
2. Remove the three screws (A) securing the HCIT drawer slide to the frame of the drawer.
3. Remove the HCIT drawer slide.
High capacity input tray (HCIT) tray lift drive motor assembly removal
Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
1. Remove the HCIT cover, right. See
page
4-162.
2. Remove the HCIT cover, left. See
"High capacity input tray (HCIT) media tray assembly
4-157.
"High capacity input tray (HCIT) cover, right removal" on
"High capacity input tray (HCIT) cover, left removal" on page
7462
A
4-164.
4-167
Repair information
Previous
Next
Go Back