After Image - Lexmark X862de Service Manual

After image

Leading edge
Trailing edge
The ghost appears on the media which, may be the image from the previous page or part of the page
currently printing.
Step
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2 Check the toner cartridge.
Install a new toner cartridge.
Re-print the defective image.
Is the image density normal?
3 Check the heat roll and the pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracking on the heat roll and/or
pressure roll?
4 Check the printer engine card assembly.
Replace the printer engine card assembly.
Perform a print test.
Does the error continue?
Check
7500-432, -632, and -832
Yes No
Go to step 2. Problem solved.
Problem solved. Go to step 3.
Replace the Go to step 4.
fuser unit
assembly.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-130.
Diagnostic information
Previous
Next
Go Back
2-219