2000-Sheet Dual Input (Ttm)-Tray 3 Front Cable Assembly Removal - Lexmark X862de Service Manual

2000-sheet dual input (TTM)—tray 3 front cable assembly removal
1.
Remove the left cover. See
2.
Remove the tray 3 assembly. See
page 4-224.
3.
Remove the tray 3 front cover. See
page 4-225.
4.
Remove the E-clip with a prying tool securing the tray lift pulley (A) to the tray lift shaft assembly (B).
5.
Remove the lift cable pulley (A).
Note: The tray 3 front cables (C) become detached.
6.
Remove the tray 3 front cables (C) from the tray lift shaft assembly (B).
"2000-sheet dual input (TTM)—left cover removal" on page
"2000-sheet dual input (TTM)—tray 3 assembly removal" on
"2000-sheet dual input (TTM)—tray 3 front cover removal" on
7500-432, -632, and -832
4-218.
4-229
Repair information
Previous
Next
Go Back