Lexmark X862de Service Manual page 118

7500-432, -632, and -832
Error code or
message
287.06
Paper jam
Check areas
G1, G3
287.07
Paper jam
Check area
G1
288.00
Paper jam
Check area F
288.01
Paper jam
Check area F
288.02
Paper jam
Check areas
G2, G3
288.03
Paper jam
Check area
G1
288.04
Paper jam
Check area F
288.05
Paper jam
Check areas
G2, G3
288.06
Paper jam
Check area
G2
2-18
MFP Service Manual
Error contents
Sensor (upper media exit)
static jam B
Sensor (upper media exit)
static jam C
Sensor (diverter gate) on jam
Sensor (diverter gate) static
jam (to top bin) A
Sensor (diverter gate) static
jam (to top bin) B
Sensor (diverter gate) static
jam (to top bin) C
Sensor (diverter gate) static
jam (to stacker bin) A
Sensor (diverter gate) static
jam (to stacker bin) B
Sensor (diverter gate) static
jam (to stacker bin) C
Description/Action
Paper remains on the sensor (upper media exit).
At this time, the sensor (bridge unit media exit) is off
state but the finisher sensor (finisher media
entrance) is turned on.
Refer to the Options Service Manual.
Paper remains on the sensor (upper media exit).
At this time, both sensor (bridge unit media exit) and
sensor (finisher media entrance) are turned off.
Refer to the Options Service Manual.
Sensor (diverter gate) is not turned on within the
specified time after the sensor (bridge unit media
exit) is turned on.
Refer to the Options Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the upper bin exit mode.
At this time the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the upper bin exit mode.
At this time, the sensor (finisher media entrance) is
turned on, but the sensor (bridge unit media exit) is
turned off.
Refer to the Options Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the upper bin exit mode.
At this time, both sensor (finisher media entrance)
and sensor (bridge unit media exit) are turned off.
Refer to the Options Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the stacker bin exit mode.
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the stacker bin exit mode.
At this time, the sensor (finisher media entrance) is
turned on, but the sensor (bridge unit media exit) is
turned off.
Refer to the Options Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the stacker bin exit mode.
At this time, both sensor (finisher media entrance)
and sensor (bridge unit media exit) are turned off.
Refer to the Options Service Manual.
Previous
Next
Go Back