Printer Engine Card Assembly Removal - Lexmark X862de Service Manual

Printer engine card assembly removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover. See
3.
Remove the rear lower cover. See
4.
Disconnect all the connectors from the engine controller card assembly (A).
Note: Connectors P405, P414, P416, and P400 have a hook that must be released.
5.
Remove the six screws securing the printer engine card assembly (A).
6.
Remove the printer engine card assembly (A).
"Rear RIP card cover removal" on page
"Rear motor cover removal" on page
"Rear lower cover removal" on page
A
P418 P407 P406 P402
P420
P421
P419
P412
P401
P400
P413
P416
Connector
Rear
P404
P408
P403
P405
P410
P422
P409
P417
P414 P415 P411
7500-432, -632, and -832
4-13.
4-11.
4-12.
4-119
Repair information
Previous
Next
Go Back