Lexmark X862de Service Manual page 708

7500-432, -632, and -832
11.
Gently pry apart, with a flat tip screwdriver, the boss on the right then the one on the left to separate the
exit 2 unit assembly into two pieces.
Note: The exit 2 unit assembly should be in two pieces.
12.
Remove the four screws securing the exit 2 right cover assembly (F) to the exit 2 unit assembly.
13.
Release two hooks securing the exit 2 right cover assembly (F) to the exit 2 unit assembly.
14.
Remove the exit 2 right cover assembly (F).
B
Hooks
Square hole
4-328
MFP Service Manual
Rear
Hook
A
F
Previous
Next
Go Back