Lexmark X862de Service Manual page 551

15.
Remove the ADF media feed assembly (G) from the ADF.
Note: The plunger in the inverter solenoid assembly (F) will become detached.
Note: Before reinstalling the ADF media feed assembly (G), ensure that the harnesses are reinserted into
their appropriate clamps.
Note: Ensure that the plunger is properly reinserted into the inverter solenoid assembly (F).
Note: Ensure that all connections are properly reconnected.
Note: When replacing the complete ADF media feed assembly, first remove the ADF left cover assembly
and the ADF registration motor from the replacement part.
D D
F F
Connectors Clamps
P758 P758
A A
P785 P785
P761 P761
Connectors Connectors
Front
P755 P755
P786 P786
P754 P754
7500-432, -632, and -832
E
Set screw
B B
G
Rear
Repair information
Previous
Next
Go Back
Clamp Clamp
4-171