Lexmark X862de Service Manual page 211

Step
9 Check the registration motor (forward or reverse) test.
Perform the registration motor test.
Open the ADF left cover assembly.
Remove the ADF rear cover. Go to
removal" on page
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch ADF registration drv mtr.
5. Touch Forward or reverse.
Does the ADF registration motor operate properly?
10 Check the ADF registration motor for connection.
Is the above motor connected properly?
11 Check the inverter solenoid assembly for operation.
Perform the inverter solenoid test.
Open the ADF left cover assembly.
Remove the ADF front cover assembly. Go to
cover assembly removal" on page
Close the ADF left cover assembly.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch Inverter solenoid.
Does the inverter solenoid assembly operate properly?
12 Check the inverter solenoid assembly for connection.
Is the above motor connected properly?
13 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
14 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
Check
"ADF rear cover
4-173.
"ADF front
4-174.
7500-432, -632, and -832
Yes No
Go to step 11. Go to step 10.
Replace the ADF Replace the
registration connection.
motor.
Go to "ADF
registration
motor removal"
on page 4-209.
Go to step 13. Go to step 12.
Replace the Replace the
inverter solenoid connection.
assembly.
Go to "Inverter
solenoid
assembly
removal" on
page 4-181.
Replace the ADF Go to step 14.
controller card
assembly.
Go to "ADF
controller card
assembly
removal" on
page 4-175.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-130.
Diagnostic information
Previous
Next
Go Back
2-111