Lexmark X862de Service Manual page 134

7500-432, -632, and -832
Error code or
message
Check tray 1
or tray 2
orientation or
guides
Check tray 2
guides
Check tray 3
or check tray
4 orientation
or guides
Close cover F
Close cover K
Close door A
Close door B
Close door C
Close door D
Close door E
Close door G
Close door J
Close
surface H
Empty hole
punch box
Insert hole
punch box
Load staples
2-34
MFP Service Manual
Error contents
Media size mismatch in
width.
Tray 2 media size failure.
Media size mismatch in
width.
Bridge unit cover is open.
HCF top door open
Printer left door open.
Printer left lower door open.
2TM/TTM left door assembly
open
Duplex left door open
Exit 2 left door open
Finisher front door open.
Printer front door open.
Eject cover open.
Punch waste box full.
Punch waste box missing.
Staple cartridge empty.
Description/Action
The media width is incorrect.
Go to "Media size mismatch in width" on
page 2-177.
Although tray 2 is in the printer, the media size is not
detected correctly.
Go to "Tray 2 media size failure" on page
The media width is incorrect.
Go to "Media size mismatch in width" on
page 2-178.
The bridge unit assembly cover is open.
Refer to the Options Service Manual.
The tray 5 HCF top door is open.
Refer to the Options Service Manual.
The printer left door assembly is open.
Go to "Printer left door open" on page
The printer left lower door assembly is open.
Go to "Printer left lower door open" on
page 2-185.
The 2TM/TTM door is open.
TTM equipped machines, go to
assembly open" on page 2-175.
2TM equipped machines, refer to the Options
Service Manual.
The duplex left cover is open.
Go to "Duplex left door assembly open" on
page 2-176.
The exit 2 left door is open.
Go to "Exit 2 left door assembly open" on
page 2-176.
The finisher front door is open.
Refer to the Options Service Manual.
The printer front door assembly is open.
Go to "Printer front door open" on page
Finisher eject cover is open.
Refer to the Options Service Manual.
The punch waste box is full.
Refer to the Options Service Manual.
No punch waste box.
Refer to the Options Service Manual.
Staple cartridge empty.
Refer to the Options Service Manual.
2-193.
2-184.
"2TM/TTM left door
2-183.
Previous
Next
Go Back