Step
6
Check the image development process.
Perform a print test. Turn off the printer power while
printing.
Carefully remove the PC cartridge, and check the
developed image formed on the drum right before the
transfer roll assembly.
Is the image completely formed on the drum, and the
area clear, black, and easy to read?
7
Check the image transfer process.
Check the toner image formed on the drum after the
transfer roll assembly.
Is the toner image completely transferred on the media?
8
Check the HVPS card assembly.
Replace the HVPS card assembly.
Perform a print test.
Does the error continue?
9
Check the printer engine card assembly.
Replace the printer engine card assembly.
Perform a print test.
Does the error continue?
Check
7500-432, -632, and -832
Yes
No
Go to step 7.
Go to step 9.
Go to step 9.
Go to step 8.
Go to step 9.
Problem solved.
Replace the RIP
Problem solved.
card assembly.
Go to
"RIP card
assembly
removal" on
page
4-130.
Diagnostic information
Previous
Next
Go Back
2-205