2-26
Removal and Replacement Procedures
Processor Power Module
To remove the processor power module:
1. Perform the preparation procedures. See page 2-2.
2. Remove the processor cage (see page 2-22) and open the cage door.
3. Pull out the clips on each end of the processor power module 1.
4. Lift the processor power module from the processor cage 2.
1
2
Figure 2-22. Removing the processor power module
Reverse steps 1 through 4 to replace a processor power module in the Compaq ProLiant 1600
server. The clips on the processor power module will snap into a locked position automatically
when the processor power module is pushed into its slot.