2-22
Removal and Replacement Procedures
Processor Cage Assembly
The processor cage assembly contains the processor cage, processor board, processor,
processor power module, and memory. See Chapter 1, "Illustrated Parts Catalog," for the
spare part numbers for these items.
Processor Cage
To remove the processor cage:
1. Perform the preparation procedures. See page 2-2.
2. Disconnect all cables from the rear exterior of the processor cage.
3. Remove the security screw (if installed) 1.
4. Push up on the processor cage ejector lever 2, and pull out 3.
1
Figure 2-18. Pulling out the processor cage lever
3
2